OK TIGROD 308L
OK Tigrod 308L has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended where there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr – 8% Ni-type with low carbon content and Nb-stabilized steels of the same type if the service temperature will not exceed 350°C. Can also be used for welding of Cr-steels except in sulphur rich environments.
Typical Tensile Properties
| As welded | ||
| Elongation | Tensile Strength | Yield Strength |
| 36 % | 580 MPa | 440 MPa |
Typical Charpy V-Notch Properties
| As welded | |
| Impact Value | Testing Temperature |
| 170 J | 20 °C |
| 135 J | -80 °C |
| 80 J | -196 °C |
Typical Weld Metal Analysis %
| Mn | Mo | Cu | C | Si | FN WRC-92 | Ni | N | Cr |
| 1.9 % | 0.20 % | 0.15 % | 0.02 % | 0.4 % | 9 % | 9.8 % | 0.05 % | 19.8 % |
| Approvals: | CE, EN 13479, CWB, ER308L, DNV-GL, VL 308 L (I1), NAKS/HAKC, 1.6-2.4 mm, VdTÜV, 04269 |
| Classifications: | EN ISO 14343-A, W 19 9 L, Wire Electrode, SFA/AWS A5.9, ER308L, Wire Electrode, Werkstoffnummer, ~1.4316, Wire Electrode |
Approvals are based on factory location. Please contact ESAB for more information.
| Alloy Type: | Austenitic (with approx. 8 % ferrite) 19% Cr – 9% Ni – Low C |
Related products
TIG Sticks
TIG Sticks
TIG Sticks
TIG Sticks
TIG Sticks
TIG Sticks
TIG Sticks